‎Where can i find replacement adhesives? | SimpliSafe Support Home
 

Where can i find replacement adhesives?

Hi, I think I’m short 4 adhesive strips for my motion sensor that completely came off the wall when i tried to slide the front part off in order to replace batteries.  Where can I find extra adhesive strips? Thanks!

This conversation is no longer open for comments or replies and is no longer visible to community members.

Accepted Solution

1.1K Messages

You can go to lowes or home depot or any hardware store even Walmart and they will have some heavy duty command strips 

6.6K Messages

@alokchakraborty For motion or glass break sensors in corners, highly recommend 3M Command velcro strips.  The 3 or 5 pound picture frame strips are great as they are a bit thicker and compensate for uneven walls nicely.  (and they are definitely not going to come loose. Just make sure the wall and sensor brackets are clean and dry.

(edited)

1 Message

Good posts. Told me exactly what I needed to know.

2 Messages

Where do I find corner motion sensor adhesive strips?

2 Messages

Where do I find corner motion sensor replacement adhesives? I've tried other adhesives and they fall off the wall.

6.6K Messages

@nwoods1953​ At your local hardware store or Home Depot/Lowes. Highly recommend 3M velco strips that hang framed photos. You can cut them to size and they are not coming off.  You must use two strips cut to size, one for the wall side and one for the sensor. Also with the extra width it fills in the gaps in corners very well.  (There isn't one straight wall in my house!) Also, don't forget you can also put the sensor just on a piece of furniture or a shelf.

If you insist on buying from SS (you wait days and pay for delivery) you can find it in the sensor area but recommend you don't waste your time or money.

Good luck.

New to the Community? Get started by reading our Welcome Article and please be sure to review our Community Guidelines before posting.