‎CO Detectors | SimpliSafe Help Center
Skip to main content

Conversation List

Filter by

(8)
SA
How to replace batteries in SimpliSafe Devices

With the exception of the Base Station, SimpliCam Indoor Camera, and Key Fob, all of the components for our latest SimpliSafe have batteries that can and should be replaced periodically.

battery/power

Help Center Article

 • Entry Sensor

SA
What is the expected battery life of Original SimpliSafe devices?

Does your Keypad look like the one pictured to the left? Then you're in the right place! You've got the Original SimpliSafe system. If you purchased a new system in 2018 or later, you likely have the Gen 3 SimpliSafe. Click here to view the article for the Gen 3 SimpliSafe. If you're not certain whi

battery/power

Help Center Article

 • SS2 System

How To Replace Carbon Monoxide Detector Batteries

The CO Detector takes three (3) Energizer AA "UItimate Lithium" 1.5V batteries and has a life expectancy of 3-5 years depending on placement and usage. To change your CO Detector batteries, twist counter-clockwise to remove the device from its' bracket. Avoid pressing the test button

battery/power

Help Center Article

 • CO Detectors

SA
How long do the batteries last, and what type do my devices use?

The battery life for our components varies slightly by system version and component type.For our latest SimpliSafe:ComponentBattery/Batteries UsedBattery Life ExpectancyBase Station4 NiMH rechargeable AA 1.2V*N/AEntry Sensor1 CR-2032 Lithium 3VUp to 10 yearsMotion Sensor1 CR-123A Lithium 3V3-5 years

battery/power

Help Center Article

 • Base Station

SA
Carbon Monoxide Detector Installation Guide

Our Carbon Monoxide Detector sniffs out dangerous leaks that can happen in kitchens, fireplaces, basements, and more. Because it's an invisible and odorless gas, Carbon Monoxide leaks could otherwise go undetected. We recommend having at least one per floor, in a bedroom or a central location.W

install/set up

Help Center Article

 • CO Detectors

SA
How do I install my Sensors by screw-mounting?

Congratulations on your new SimpliSafe system! Before installing your sensors, you'll need to install your core devices, such as your Base Station and Keypad. Then, you can install your sensors with the included adhesive strips, or by mounting them with screws.To screw-mount your sensors:Take o

install/set up

Help Center Article

 • Entry Sensor

SA
How do I activate the batteries in my SimpliSafe sensors?

You will need to activate batteries for each component before using your system. To activate batteries, simply pull on and remove the white protective strip from each component.

install/set up

Help Center Article

 • Entry Sensor