Motion Sensor Gen 1 Overview and Installation Guide
install / set up help
Updated
, by simplisafe_help_center
Overview
Motion Sensors are always on the lookout for uninvited guests. They can detect motion within 30 feet, with a 90-degree field of view. They’re also designed to distinguish between people and pets. If you have a pet in your home, check out the Pet Owners video on this page for additional installation instructions.
Before Getting Started
You’ll need to install your Base Station prior to getting started. If you have pets, please watch both of the installation videos below.
What’s in the Box
Motion Sensor Gen 1 with mounting plate
Screws (optional for permanent installation)
If you want to mount your Motion Sensor Gen 1 on a wall using its adhesive backing, make sure the surface has been wiped clean and has had time to dry.
If you plan on wall mounting your Motion Sensor Gen 1 with the included screws, you’ll want to also have a Phillips head screwdriver available.
How to add the Motion Sensor in the SimpliSafe® Mobile App
Open the SimpliSafe® Mobile App on your smartphone or tablet
Navigate to the three-bar menu on the upper left corner and select Add Device or Camera
Select Motion Sensor from the list of available products
How to Pair the Motion Sensor to Your System
Pull out the battery tab from the back of the device
Press and release the setup button on the top of the device
Once the setup button has been pressed, the Base Station should say “Motion Sensor”
Choose a name for the device by selecting one of our pre-populated names, or select Custom Name at the bottom of the screen to input your own
Where to Put the Motion Sensor
Bring the Motion Sensor to its desired location, if you have not already
The Motion Sensor looks out and down with a 90° field of view, so it has the best visibility when mounted in a corner
We do not recommend installing the Motion Sensor near AC units, vents, or heat-generating objects, as changes in heat signatures within a room have the potential to trigger false alarms
Choose a spot 4-6 feet off the ground to mount the Motion Sensor, making sure that its setup button is facing up
If you have pets that are 30 pounds or more, we recommend installing the Motion Sensor 4 feet off the ground with its setup button facing down
If you have pets that are under 30 pounds, install the Motion Sensor 6-10 feet off the ground with its setup button facing up
How to Mount the Motion Sensor With its Adhesives
Clean the desired surface using rubbing alcohol
Wait for the surface to dry completely
Peel the plastic backing off of the adhesive strip on the back of the Motion Sensor
Press and hold the Motion Sensor in place for 30 seconds
How to Mount the Motion Sensor With its Included Screws
Remove the adhesives from the mounting plate
Slide the Motion Sensor up and off its mounting plate
Use a screwdriver to secure the mounting plate to the wall
Slide the Motion Sensor back on the mounting plate
Watch the video below for a hands-on experience from our team of experts for the installation process
