‎Pairing your PIN Pad with Smart Lock | SimpliSafe Help Center
IMPORTANT: For systems purchased before 2020, you may lose connection to professional monitoring as of 12/31/22 if your Base Station 2G cellular module is not upgraded. Call us or check your SimpliSafe app Overview screen to see if your system is affected.

Pairing your PIN Pad with Smart Lock

 Updated 

If you are using your Keypad to pair the PIN Pad and Lock together, follow the steps below:

  1. Press Menu on your Keypad, then enter your Master PIN

  2. Select 'Devices'

  3. Choose your Lock and then choose PIN Pad

  4. When the Lock is in pairing mode, hold down the PIN Pad's "Lock" Button for 5 seconds

  5. The Base Station should announce "PIN Pad added" once it's added

  6. Lastly, test your Lock by trying to lock and unlock your door using your Master PIN on the lock's PIN Pad

If you are NOT using your Keypad to pair them together, follow these steps:

  1. Put the Lock in pairing mode by pressing the Lock's pairing/test button.

    1. This is located underneath its battery plate

  2. When the Lock is in pairing mode, hold down the PIN Pad's "Lock" Button for 5 seconds

  3. The Base Station should announce "PIN Pad added" once it's added

  4. Lastly, test your Lock by trying to lock and unlock your door using your Master PIN on the lock's PIN Pad.