What Does "Device Connection Problem" Mean and How to Resolve It

The app error “Device Connection Problem” occurs whenever the SimpliSafe® Mobile App cannot reach your Base Station. This can happen if the Base Station is not connected to its Wi-Fi or cellular backup*, or if your smartphone has a poor signal.

*In order for the Base Station to connect to its cellular backup, you must be subscribed to either our Pro Plus, Pro, Core (formerly Fast Protect™), or Standard Monitoring plans.

Troubleshooting the Base Station’s Connection

As a first step, you’ll want to make sure that your Base Station has a strong connection to your Wi-Fi network or your nearest cell tower.

To rule out any interference that could impact the Base Station’s connection, make sure that it is at least 3 feet off the ground and is on a non-dense material like wood or glass. The Base Station should also be in an open-air area, not enclosed in a place like a cabinet or closet. 

The Base Station will also experience connection issues if it is placed near any of the following devices:

• Wi-Fi routers

• Televisions

• Wireless weather stations

• Larger appliances that emit radio frequency signals

If your Base Station is near any of these devices, we recommend moving it 3-5 feet away from them.

Resetting the Base Station can also help with re-establishing its connection to your network. Watch the video below for step by step instructions on how to reset the Base Station

Troubleshooting Your Smartphone’s Connection

If your smartphone has weak service, that can cause communication problems between it and the SimpliSafe® Mobile App. If you notice consistent service issues with your smartphone, please contact your carrier for further assistance. 

This error can also be caused by a VPN or firewall blocking the SimpliSafe® Mobile App. If you have a VPN or firewall installed on your smartphone, try disabling it temporarily and then access the SimpliSafe® Mobile App again.