For help ADDing A NEW SENSOR TO AN EXISTING SYSTEM, PLEASE SEE THIS PAGE.
Congratulations on your new SimpliSafe system! Before installing your sensors, you'll need to install your core devices. Then, you can install your sensors with the included adhesive strips, or by mounting them with screws.
To screw-mount your sensors:
- Take off mounting plate by sliding the sensor up and off of it
- If the included adhesive covers the screw holes on the mounting plate, you should be able to push the screws through the adhesive layer
- For ease of installation, first adhere the mounting plate to wall and then screw it into place (shown below)
- Slide your sensor down into the mounting plate