First we should clarify what kind of lights you're seeing.
Is the light moving from side to side? That means the Lock has entered pairing mode.
If the light alternates between the two sides and the middle, that means the lock has jammed, but you might be able to manually unlock to un-jam it.
If you need to reset and reinstall, you need to press the button above the lights and
hold for sixteen seconds. It will then disengage itself from the system and will be ready to be installed again.
@Johnny M. nice post but when I entered "Smart lock jammed" in the Help Ceneter and got Install manual for smart lock etc but not a direct hit on this topic. Suggest you add.
I have tried the reset for 16 seconds thing a number of times. It has no effect. The three light pattern (left-center-right-left-center-right) continued so long that the batteries died. Replaced batteries and the lights pattern starts up again.
Sounds like your lock had been disengaged from the system and has indeed entered Pairing Mode. And re-adding through the Keypad Menu doesn't work?
Something might have gone wrong with the update (or it might not have completed properly) and our Support team might need to replace the Smart Lock for you.
- Johnny M. SimpliSafe Home Security
New to the Community? Get started by reading our Welcome Post.
davey_d
Community Admin
•
4.3K Messages
2 years ago
First we should clarify what kind of lights you're seeing.
Is the light moving from side to side? That means the Lock has entered pairing mode.
If the light alternates between the two sides and the middle, that means the lock has jammed, but you might be able to manually unlock to un-jam it.
If you need to reset and reinstall, you need to press the button above the lights and hold for sixteen seconds. It will then disengage itself from the system and will be ready to be installed again.
- Johnny M.
SimpliSafe Home Security
1
0
wyszynski
2 Messages
2 years ago
0
0
davey_d
Community Admin
•
4.3K Messages
2 years ago
Sounds like your lock had been disengaged from the system and has indeed entered Pairing Mode. And re-adding through the Keypad Menu doesn't work?
Something might have gone wrong with the update (or it might not have completed properly) and our Support team might need to replace the Smart Lock for you.
- Johnny M.
SimpliSafe Home Security
0
0