‎How do I install my Sensors by screw-mounting? | SimpliSafe Help Center

How do I install my Sensors by screw-mounting?

 Updated 

Congratulations on your new SimpliSafe system! Before installing your sensors, you'll need to install your core devices. Then, you can install your sensors with the included adhesive strips, or by mounting them with screws.

To screw-mount your sensors:

  1. Take off the mounting plate by sliding the sensor up and off of it

  2. If the included adhesive covers the screw holes on the mounting plate, you should be able to push the screws through the adhesive layer

  3. For ease of installation, first adhere the mounting plate to the wall and then screw it into place (shown below)

  4. Slide your sensor down into the mounting plate

Screen_Shot_2021-03-18_at_1.11.44_PM.png