Upgrading Your Smart Lock to the Smart Lock Series 2

Next, you will need to add the Smart Lock Series 2 to your SimpliSafe® account.

1. Open the SimpliSafe® Mobile App (opens in new tab) on your smartphone or tablet

2. Navigate to the three-bar menu in the upper left corner of the screen

3. Choose Add Device or Camera (opens in new tab)

4. Select Smart Lock

5. The SimpliSafe® Mobile App will then prompt you to press a button on your Smart Lock Series 2 and name it

Next, you’ll need to remove the Smart Lock 

1. Using the wide side of the included Release Tool as a lever, slide the wing latches on the Smart Lock outward on both sides

   

2. Pull the Smart Lock off your door

3. Remove the mounting plate, but keep the old screws 

Now, you’re ready to install the Smart Lock Series 2

1. Slide the wing latches on the Smart Lock Series 2 out to remove the mounting bracket

2. Using the same screws from the Smart Lock, install the mounting plate that came with your Smart Lock Series 2

3. Using the adapter pieces that came with the Smart Lock Series 2, place the same color adapter piece that you used for your original Smart Lock on the mounting bracket

4. Follow the in-app instructions to complete setup