From the app’s home screen, click the three horizontal lines on the top left to pull out the side menu. Next, click “Cameras” to pull out the camera page and near the top right of the screen, just below the home icon, there’s a gear icon. Click the gear icon to bring up your currently installed cameras. Select the camera you would like to update and it should slide to that particular camera’s settings screen. From here you have access to the following options:
Setting |
Explanation |
Setting Options |
Default Value |
Visual Verification |
Determines whether the monitoring center can see your camera footage in the event of an alarm |
Off On |
Off |
Motion Detection |
Determines the sensitivity of motion detection. This affects both notifications and automatic recordings |
Off Low Medium High |
Medium |
Motion Notifications |
Determines whether you will receive push notifications for motion events for your smartphone |
Off On |
On |
Doorbell Ring Notifications |
Determines whether you will receive push notifications when someone rings your video doorbell |
Off On |
On |
WiFi Network |
Allows you to choose the WiFi network for your cameras. |
N/A |
N/A |
Night Vision |
Emits an infrared light to allow the camera to view at night. |
On Off Auto |
Auto |
Mic & Audio |
Determines if audio is recorded with camera video |
On |
On |
Status Light |
LED light that indicates when the camera is recording. |
On Off |
On |